Smart vacuum slab lifter - cutting edge technology

Hi folks.

Made this contraption last week. I always wanted one like this but those commercially available cost an arm and a leg.

https://i.postimg.cc/CKFYhZ12/11-D2-...7-AF3842-F.png

Allows lifting and laying full size slabs without breaking your back.

Also single man operation. Vacuum is provided by a domestic Hitachi vacuum cleaner.

https://i.postimg.cc/mg3BW3bM/D93004...-D8-C62067.jpg

Above image shows the underside of suction head. A 3 mm thick rubber sheet is held in position by a worn out 350 mm diameter diamond cutting disc. That is main reason why this is cutting edge technology.

Will soon add a short video showing contraption lifting a standard 60 kg 2x3 foot concrete slab.

Looks good, are you going to market it?

John

Quote:

---

Originally Posted by Heinkeljb

Looks good, are you going to market it?

John

---

Of course not but anyone can make their own provided they have the necessary skills.

I made this slab lifter out of scrap wood, 18 mm plywood, a twisted 2 by 4 stud, 3 mm rubber sheet and a worn out diamond cutting disc. Also a short piece of 1 1/4" solvent weld drain pipe.

Below you can see the contraption in action:

https://www.youtube.com/watch?v=Ut7fGWCy9EI

That's clever.

I could have done with that the other week when I moved and relaid some Council (heavy) 3x2's.

Bostin

:smartbs:

The heavy duty 900x600 concrete slabs around here are 63 mm thick and weigh 77 kg each whilst the standard 50 mm thick slabs typically weigh 60 kg, although slightly heavier when freshly cast.

I load tested my contraption. Had my wife standing on top and jumping on a standard 60 kg slab lifted with this contraption. Static load at least 60 kg plus 55 kg so should have no problem lifting the heavy duty council slabs.

One thing I noticed when relaying slabs for a friend is the slab lifter has enough suction on slabs such that I can pound a proud sitting slab deeper to be level with surrounding slabs.

Very clever ....

Not clever but rather Smart IMHO.

A few more photos of the slab lifter:

https://i.postimg.cc/VkD30HSF/21-CC0...3-FADFC6-E.jpg

https://i.postimg.cc/zGJsB1fB/2884-C...01-A8-D758.jpg

https://i.postimg.cc/DydVnznH/93-B78...BF7-CF07-F.jpg

A short video showing how one can use this slab lifter to tamp down or compress the ground below slab (Simulated in below video).

https://www.youtube.com/watch?v=Jup5NNO4bkw

Note that reduced vacuum is applied. See hole is open in vacuum hose handle.