Results 1 to 2 of 2

Thread: Speedo pinout

  1. #1
    Join Date
    Mar 2012
    Location
    Burnley
    Posts
    1,087

    Speedo pinout

    Does anyone have the full pin out for the speedo head 20 pin connector?

    I can work out power ground and the can bus but I need the ignition controlled live at least but would prefer the full pin out if possible.

  2. #2
    Join Date
    Mar 2012
    Location
    Burnley
    Posts
    1,087
    For anyone that needs it:

    http://rollingpast.com/john/speedo.JPG

    I am thinking that sticking an NTC thermistor in the top hose and connecting it to pins 16 and 18 would make the outside temperature read the engine temperature. That is much easier than this lump of circuits I have stuck together to do the same job.

    Worth a try at least.
    Last edited by Mjolinor; 06-04-2017 at 09:10 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •