Page 2 of 6 FirstFirst 1234 ... LastLast
Results 11 to 20 of 60

Thread: 2010 cdi passion

  1. #11
    Join Date
    Jan 2014
    Location
    hythe kent
    Posts
    27
    This is the view of my engine cd1 2011
    Attached Images Attached Images

  2. #12
    Join Date
    Jan 2014
    Location
    hythe kent
    Posts
    27
    I have also bought a spare engine ecu, I will open and read the eeprom (off the board ) and then swap over, I,,, it maybe my control unit, as the owner did say he had a melt down on the glowplug control unit, so maybe its back fed the ecu, ,,,

  3. #13
    Join Date
    Mar 2012
    Location
    Burnley
    Posts
    1,092
    It will not have done that. They are prone to those connections going naff, they are not robust enough.

  4. #14
    Join Date
    Jan 2014
    Location
    hythe kent
    Posts
    27
    what connections ? i have checked all continuity on the termination of wires on all the plugs,? which wires r naff

  5. #15
    Join Date
    Mar 2012
    Location
    Burnley
    Posts
    1,092
    The connections on the glow plug / electric cabin heater control module.

  6. #16
    Join Date
    Jan 2014
    Location
    hythe kent
    Posts
    27
    really ! ok ill check them

  7. #17
    Join Date
    Mar 2012
    Location
    Burnley
    Posts
    1,092
    There will not be anything wrong with the,m. You said the previous owner had trouble with them, this is very common but problems with that is unlikely to have done any damage further back down the signal line.

  8. #18
    Join Date
    Jan 2014
    Location
    hythe kent
    Posts
    27
    no it looks like the previous owner has had issues with these pipes as there is new vacuum pipes everywhere, i think there on incorrectly, i have desoldered and replaced eeprom from original unit , and still exactly same issue, so its not the ecu,,more wiring and plug checks now then

  9. #19
    Join Date
    Mar 2012
    Location
    Burnley
    Posts
    1,092
    You need to check that the wastegate arm has not been undone leaving the wastegate open.

  10. #20
    Join Date
    Jan 2014
    Location
    hythe kent
    Posts
    27
    yep thats a given, one of my 1st calls, all mechanical checks done

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •